HD Flooring Ltd

If you need any help or advice, or would rather order by phone please call 0113 2573481


Items:, Value:
 

Wrenches, Jacks & Clamps etc.

Floor Installation Tools, Rollers, Applicators,  |  Wrenches, Jacks & Clamps etc.

Cepco Bowwrench/Deck ToolNo BW2
Cepco Bowwrench/Deck ToolNo BW2
A self locking device for bending warped boards and installing tongue & groove materials over 2" joists. Just slip on the joist, swing the handle and let go. Also ideal for decking, t&g plywoood, roofing, t&g walls,t&g ceilings.
Our Price: £46.46 (£54.59 Including VAT at 17.5%)



Cepco Quickjack Floor Jack No QJ1
Cepco Quickjack Floor Jack No QJ1
A universal construction jack for on site use over solid concrete or plywood sub floors etc. Pulls and pushes the last board with ease, no more wedges, chisles or damaged boards and no more gaps.The easy to use side wind mechanism can produce considerable pressure due to bevel gearing and screw mechanism, the jack stays put when the boards are tightened leaving your hands free for final fixing.
Our Price: £126.35 (£148.46 Including VAT at 17.5%)



Vaughan Bow Jack Board Straightener No BJ11
Vaughan Bow Jack Board Straightener No BJ11
The new Bow Jack from Vaughan & Bushnell quickly takes the curves out of warped, bent or crooked boards. When placed next to a bowed board, the BowJak is tapped into place on the adjacent joist, then the handle is pulled to force the board "straight" for final hammering. The operation takes only a few seconds and can close gaps between boards up to 2 ¼ inches. The lightweight, 26-ounce BowJak, at 12 inches, easily fits most tool pouches and is handily stored by its "tail hook."

- Fast and easy to use

- Use on Decking, Flooring, Tongue & Groove, Ceilings, Siding, Composites, Log Work.

-Straighten Crooked, Bent and Warped Boards

- Use in any position (horizontal, vertical or overhead)

- Compact Design - Fits in most tool pouches.

- Lightweight

- Can close gaps up to 2.25 in.

- Easy to store with handy "Tail hook"


Our Price: £25.62 (£30.10 Including VAT at 17.5%)



Cepco Bowrench Adjustable Gripper No BW3
Cepco Bowrench Adjustable Gripper No BW3
An accessory which fits onto the Bowrench BW2 which will adjust for oversized joists etc. From 11/2" to 61/4"
Our Price: £27.30 (£32.08 Including VAT at 17.5%)



Cepco Laminate Clamps No LC1
Cepco Laminate Clamps No LC1
25mm wide canvas webbing 5 metres long equiped with a wide metal clamp at one end to hook over the edge of the first floor board and a wide racheted clamp for the open end of the work which will pull together any width of floor up to a maximum of about 5 metres.

Used in pairs these clamps are a cheap and effective way of holding planks together.

Priced each
Our Price: £7.55 (£8.87 Including VAT at 17.5%)



Pro Edge Cutting Guide
Pro Edge Cutting Guide
2 x Heavy duty alloy rails joined together makes straight accurate cuts up to eight foot. 2 clamps included - can be used with a circular saw, router , jig saw etc
Our Price: £27.30 (£32.08 Including VAT at 17.5%)



Power Jack Pull No 100
Power Jack Pull No 100
These jacks speed up the installation of a quality floor by pulling & jacking the boards into place without the use of pry-bars or crow bars, thus preventing damage to the boards and tightly closing all gaps.


Our Price: £212.30 (£249.45 Including VAT at 17.5%)



Power Jack Push No 200
Power Jack Push No 200
These jacks speed up the installation of a quality floor by pushing & jacking the boards into place from any solid object, without the use of pry-bars or crow bars, thus preventing damage to the boards and tightly closing all gaps.
Our Price: £212.30 (£249.45 Including VAT at 17.5%)



Floor Installation Tools, Rollers, Applicators,  |  Wrenches, Jacks & Clamps etc.


If you need any help or advice, or would rather order by phone please call 0113 2573481